Field Service Manual December 2003
Page 251 of 276
2. dir \\PowerRip\ripshare
By doing this you look at the contents of the ripshare directory on the PowerRip.
(This is the d:\rip\share directory) If you want to be sure this is ok you can place a file
in this directory and you should be able to see it from the Ucam Station.
Extra documents available :
PowerRip v2.x – UcamUnix
Trip – UcamUnix
Trip – UcamNT
Smartplot Console on PowerRip
Update Ucam.db on PowerRip Windows workstation
smartupl.ripdir
Example: smartupl.ripdir: \\powerrip\ripshare
‘powerrip’ is the name of the PowerRip computer
smartupl.mountdir
Example: Smartupl.mountdir: \\powerrip\ripshare\;\\powerrip\ripshare\
‘powerrip’ is the name of the PowerRip computer
To Next Page
Loading...