Field Service Manual December 2003
Page 241 of 276
Expose commands
Files coming from a CAM station have to be in ‘DPF’ format. Files used by the
PowerRip to expose are in ‘PRX’ format.
During the machine test phase, and for field service, jobs can be manually
preprocessed and exposed.
All commands can be executed from a DOS prompt
Preprocessing.
• Dpfprp
Dpfprp c:\rip\dpf\test.dpf /g=4000 /osp=1
switch description default
osp=x old ovsp(powerrip.res file) not set
g=resolution select the resolution
• Prpprx
Prpprx c:\rip\dpf\test
Exposing.
• Prxout
Prxout c:\rip\dpf\test /au /keep /nod /conf=conf1 /absosp=0 /asymosp=0 /fr=33
/sh=(1000000,1000000) /mpr=C:\rip\testj\4000o0.mpr
/licensefile=C:\rip\flexlm\license.dat
switch description default
au*to select film autoloading manual loading
nod*elete set the prx delete flag set
sh=(xv,yv) set the shrink or expand values (1000000,1000000)
conf=filmtype select a filmtype depends on the resource file
keep set the keepflag not set
mpr=mprfn read extra machin parameters no extra param.
absosp=x new ovsp (has effect on both scanlines) (powerrip.res file)
asymosp=x ;new ovsp (has only effect on fast scanlines) (powerrip.res file)
To Next Page
Loading...