Field Service Manual December 2003
Page 28 of 276
Commands
General
LTL >?feeder
1 SFDREL : take over cylinder forward
2 SFDREL : roll down
4 SFDREL : stepper against belt
8 SFDREL : filmfeed bridge up
16 SFDREL : air bags up
32 SFDREL : transport motors on
64 SFDREL : online up
128 SFDREL : vacuum ejector on
0 FEEDET . : 1 ---> roll up
1 FEEDET . : 0 ---> stepper home
2 FEEDET . : 0 ---> filmfeed bridge up
3 FEEDET . : 0 ---> filmfeed bridge down
4 FEEDET . : 1 ---> film on inline
5 FEEDET . : 1 ---> film on online
6 FEEDET . : 0 ---> unload drawer closed
7 FEEDET . : 0 ---> vacuum in suc. Caps
LTL > ?maccon
1 SIOREL : motor feeder bridge on
2 SIOREL : direction away bridge
4 SIOREL : separation air
8 SIOREL : roll down small cilinder
16 SIOREL : spare
32 SIOREL : spare
64 SIOREL : spare
128 SIOREL : spare
0 IODET . : 0 ---> flap end backward
1 IODET . : 0 ---> spare
2 IODET . : 0 ---> film against bridge
3 IODET . : 0 ---> spare
4 IODET . : 0 ---> spare
5 IODET . : 0 ---> spare
6 IODET . : 0 ---> spare
7 IODET . : 0 ---> spare
8 IODET . : 0 ---> spare
• Syntax: CFG
By entering CFG, you get an overview of the machine configuration. The LTL
software version is mentioned, and the installed hardware options for film feed
and circuit boards.
• Syntax: CHKSWI
To Next Page
Loading...