Field Service Manual December 2003
Page 10 of 276
Operator switches
Door Button.
The door button is used to open or to close the front door (i.e. a rolling-shutter). This
is needed to access the film cassette and drum area.
Ones the door button is pressed first the filmfeeder bridge will move up and second
the door will open. The bridge is first moved up so the cassette is free for film
installation.
The door can also be opened by pressing ‘d’ and confirming with ‘y’ at
Ready to work. In this case the door will open but the feeder bridge will stay down.
On Button.
The On button switchs on the vacuum pump.
This is only needed to load a film manually.
In standby mode the button appears green.
Off Button.
The Off button switchs the vacuum pump off e.g. after exposing with manual
load. In standby mode the button appears green.
To Next Page
Loading...