Field Service Manual December 2003
Page 235 of 276
Testjobs - Density and Linewidth
To adjust density and linewidth on film a program called
‘Create_mpr_mf.exe’ is used. All testjobs can be found on
‘C:\rip\field\jobs’ on the PowerRip.
Just execute the ‘Create_mpr_mf.exe’ file. (For example from C:\rip\testj)
Explanation of the ‘Create_mpr_mf.exe’ program:
The goal of this program is to plot several jobs with different parameters on one
film. The testjob we will expose on film is called ‘delite.dpf’. A example of the
job is found at the end of this testjob explanation.
• You first give in the ‘Number of different resolutions’ you want on the film.
• Parameter settings. And search a ‘DPF file’.
To Next Page
Loading...