Barco SilverWriter 800 - Film Processor Connection

Field Service Manual December 2003
Page 271 of 276
Film Processor Connection
1
5
cm
2“
3 cm – 1.2”
Film guide plate from Barco
Front of film processor
Conveyor bellows from Barco
SILVERWRITE
R
conveyor
Conveyor transport belt
30cm – 12”
Film guide plate of
film processor
max. width 90cm – 35.4”
First film take-up rollers
The conveyor bellows connection plate from
Barco is fixed to the front of the film processor,
and fits around the film processor film input slit
Wall thickness
1
0cm – 4” max
Conveyor top door
I
f the wall is thicker then 10cm, the film
p
rocessor must be installed through the
w
all. Otherwise you will not be able to
o
pen the unload drawer, pulls out 50cm
Close-up see
u
nderneath
W
all
F
ilm processor
SILVERWRITER: right side
Front of film
processor
Wall sealing plate
1550mm
61”