Barco SilverWriter 800 - Page 232

Field Service Manual December 2003
Page 232 of 276
type: pos
name: ARX7
PR_recorder.res
#########################################################
#
# BARCO GRAPHICS - Nieuwevaart, 153 - B9000 Gent Belgium
#
#########################################################
;
; CHARACTERISTICS OF RECORDER
;
; neg : 0 = only pos, 1 = only neg, 2 = both
; wrong : 0 = only rite, 1 = only wrong, 2 = both
; skip : possibility to skip in fast scan direction, 0 = no 1 = yes
; vcoord : possibility to position in fast scan direction, 0 = no 1 = yes
; hcoord : possibility to position in slow scan direction, 0 = no 1 = yes
; autoload : 0 = only manual, 1 = only automatic, 2 = both load film
; optics : type of optics, 100 or 300 (default 100)
; maxvh : maximum size of film v,h in mil
;
; Note that SSIPRO cannot expose wrong reading !
;
[AmphiWriter]
neg : 2
wrong : 0
skip : 1
vcoord : 1
hcoord : 1
autoload : 2
optics : 600
maxvh : 32000 28000
;
;
; RECORDER EXPOSE SETTINGS AVAILABLE
;
settings : 400 500
;
; RECORDER EXPOSE SETTINGS DESCRIPTION
;
; [set_n] with n from 0 to 15
; nominal_ppi, num_beams, gamma_value, spot_oversize, sex_range (in 10000ths)
;
[set_400]
numset : 10
1 : 2000,24,0,1,9000-11000
2 : 2540,24,0,1,9000-11000
3 : 4000,24,0,1,9000-11000
4 : 4064,24,0,1,9000-11000
5 : 8000,24,0,1,9000-11000
6 : 8128,24,0,1,9000-11000
7 : 16000,24,0,1,9000-11000
8 : 16256,24,0,1,9000-11000