Field Service Manual December 2003
Page 53 of 276
Checking the in-line and on-line detection’s
In-line
:
LTL> do 4 feedet . 5e5 wait tilkey
0 -> no film detected
1-> film detected
On-line
:
Online switch on position 1:
LTL>5 feedet . -> 1
when unloading the LED is blinking, the online bridge is moved up and the film is
unloaded in the unloading drawer.
Online switch on position 2:
No LED’s are lit.
LTL>5 feedet .
0 -> no film detected
1 -> film detected
When unloading the LED is blinking the online bridge is down and the film is
moved to the developer.
To Next Page
Loading...