Field Service Manual December 2003
Page 88 of 276
Resource files
During exposure parameter70 is not used. For loading a filmsize with the correct
parameters a parameter called ‘setting’ is used. This can be found in the
‘PowerRip.res’ file and ‘PR_recorder.res’. You must define the correct filmsize in
the ‘PR_film.res’.
Ex.: Setting: 400 ➭ 4 | 00
(LTLparameter>)70:Film in use in LTL mode: 4 12: Film type in use:0
(Exposure) PowerRip.res & PR_recorder.res
4: Filmsize around drum
0&1 = 28 inch
2&3 = 27 inch
4&5 = 26 inch
6&7 = 25 inch
8&9 = 24 inch
00: Filmtypes
• PowerRip.res
-Adding a filmtype with the correct parameters.
; CONFIGURATION AVAILABLE AND LAST USED
;
confs: a26X26
conf_used: a26X26
[a26X26]
film : 26X26
marginvtb : 0,0
marginhlr : 0,0
ressup : 4000 8000
ovsp : 1 1
ovsp_asym : 0 0
ovsp_abs : 0 0
jobreg : C,C
negbord : 1
negbordsiz : 500
pinzone : 0,0
setting : 400
autoload : 2
filmreg : C
To Next Page
Loading...