Field Service Manual December 2003
Page 90 of 276
What a customer has to do when changing filmsize
→
IMAGER :
For every filmsize changement the cassette has to be adjusted.
→
UPLOT OR SMARTPLOT :
SELECT IN ‘UPLOT’ THE CORRESPONDING ‘FILM’ OR IN ‘SMARTPLOT’ THE
CORRESPONDING ‘PLOTTER CONFIGURATION’.
All settings were done in the ‘Plotter parameters’ & ‘Resource files’.
Exercise :
Filmfeeder setup for three different filmsizes : 18x24 ; 22x26 ; 32x28
………………………………………………………………………………………
………………………………………………………………………………………
………………………………………………………………………………………
………………………………………………………………………………………
………………………………………………………………………………………
………………………………………………………………………………………
………………………………………………………………………………………
………………………………………………………………………………………
………………………………………………………………………………………
………………………………………………………………………………………
………………………………………………………………………………………
………………………………………………………………………………………
………………………………………………………………………………………
………………………………………………………………………………………
………………………………………………………………………………………
To Next Page
Loading...