Barco SP2K-S

R5913197 /02 SP2K-S78
Type of HDD swap
On ICMP On ICMP-X
Set of 3 HDDs with content
reused from an ICMP with
GEN1 storage controller.
On an ICMP with GEN1 storage
controller:
• Content is preserved but
certificates (KDM) need to be re-
ingested.
On an ICMP with GEN2 storage
controller:
• All content will be lost.
• Only usable after RAID
initialization + restart (content
can then be ingested
immediately).
• All content will be lost.
• Only usable after RAID
initialization + restart (content
can then be ingested
immediately).
Set of 3 HDDs with content
reused from an ICMP-X.
1. Unit is equipped with an GEN1
storage controller (default
configuration):
- All content will be lost.
- RAID initialization needs to be
perform with Communicator.
2. Unit has been upgraded with a
GEN2 storage controller (+ ICMP
software 1.4.2 or higher is
installed):
- Content is preserved but
certificates (KDM) need to be
re-ingested.
• Content is preserved but
certificates (KDM) need to be re-
ingested.
ICMP-X