R5913197 /02 SP2K-S98
8.3 Switching the projector OFF
Putting the projector in ECO mode is thé preferred method of shutting down the projector after a day
of playing. Only switch the projector to OFF if technical problems have occurred.
Take into account that you can not start the projector remotely when the projector has been
switched OFF. You can only power it using the power button.
How to put the projector in ECO mode, using the touch display?
1. In the main menu of the touch display, press on the ECO button.
Image 8–6
2. In the Eco menu, press “Switch to ECO mode”. Press for more than one second.
Image 8–7 Example of the ECO menu on the touch display
How to put the projector in ECO mode, using the Web Communicator?
1. In the Communicator, browse to Control >> Power.
2. In the Power menu, press Switch to ECO mode and confirm.
Projector Power Cycle
To Next Page
Loading...
