Beam ECG - Page 35

35
Beam
®
, Operating Manual, Rev. 4.6.1 01/2016, GmbH
Hypertension-Management-Software Client-Server
®
4
Step ECG Recorder Beam
®
PC
4)
► Click on
.
The Bluetooth device search win-
dow appears.
After a moment the serial num-
ber appears in the window, e.g.
180000H1.
► Click on the serial num-
ber.
► Click on
.
A Note appears: The (one-time)
Pairing was successful.
► Click on
.
5) Buzzer sounds.
6) The measuring device appears
in the Interfaces window on the
Bluetooth tab.
► Click on
.
The Bluetooth interface between the ECG Recorder Beam
®
and the HMS CS pro-
gram is now configured and the HMS Client Server Software detects from now on
the ECG Recorder Beam
®
, as soon as it goes into communication mode.