EasyManua.ls Logo

Becker BD406 - Scope of Functionality

Becker BD406
112 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Becker Avionics
Installation and Operation
Scope of Functionality
DV16401.03 Issue 04 May 2021 BD406/PBD406 17
1.4 Scope of Functionality
The device(s) receives, decodes and processes COSPAS/SARSAT distress signal in a
range of 406.020...406.081 MHz.
BD406 with control head:
The BD406 with control head is a single block device made for installations in fixed and
rotary wing aircraft.
BD406 dimensions correspond to the standard instrument diameter of 58 mm (2¼ inch).
o It can be installed with four screws (rear panel installation).
o All controls and indicators are on the front panel.
o The equipment connectors and the antenna sockets are at the rear of the device.
BD406 without control head:
The BD406 without control head is a single block remote-controlled device made for
installations in fixed and rotary wing aircraft.
o It does not have a control head or user interface (remote-controlled).
o The equipment connectors and the antenna sockets are at the rear side of the device.
Installation: For dimension see "BD406 without Control Head" page 41 and "BD406
without Control Head with Mounting Kit MK4401" page 42.
o Use the mounting kit MK4401 to install the device in the avionic bay environment.
PBD406:
PBD406 is the portable version with its own battery, internal speaker, battery charger and
inputs for RX and GPS antennas.
It includes a BD406 single block device with control head.

Table of Contents

Related product manuals