DV16401.03 Issue 04 May 2021 BD406/PBD406 85
Audio Notification
BD406 without control head:
N/A.
• BD406/PBD406 can supply voice notifications to speaker or headphones. Audio
messages are supplied on demand or in case of special event which occurs in the system.
• The operator is notified about device malfunctions or when signal from distress beacon is
detected.
Message supplied when digit 0 is reported.
Message supplied when digit 1 is reported.
Message supplied when digit 2 is reported.
Message supplied when digit 3 is reported.
Message supplied when digit 4 is reported.
Message supplied when digit 5 is reported.
Message supplied when digit 6 is reported.
Message supplied when digit 7 is reported.
Message supplied when digit 8 is reported.
Message supplied when digit 9 is reported.
Message supplied when the dot separator is reported.
Message supplied when signal from beacon, which is already registered in
internal memory, is received.
Message supplied when signal from beacon, which is not registered in internal
memory, is received.
Message supplied when the degree value is reported.
Message supplied when the distance to the target is reported.
Message supplied when the kilometer value is reported.
Message supplied when the nautical mile value is reported.
Failure
Message supplied when error is found during PBIT.
Message supplied when true bearing is necessary.
Message supplied when reported value is unknown.
Message called homing. It contains phrase:
"True bearing: XXX degrees. Distance XXX.X kilometers (miles)."
Example of a spoken message:
"True bearing: Two, three, five degrees. Distance: One eight nine dot four
kilometers."
• When distance is set to nautical miles word kilometers is replaced with miles.
• When distance/true bearing are not valid the device announces:
o "True Bearing: Unknown. Distance: Unknown."
o Homing message is triggered by push rotary knob (depends on