Packaging, Transport, Storage
34 BD406/PBD406 DV16401.03 Issue 04 May 2021
Wiring - BD406 without Control Head, J1 Connector ....................................................... 61
Antenna Installation ........................................................................................................... 62
2.7 Installation Setup ......................................................................................................................... 62
Start Installation Setup ...................................................................................................... 62
Navigate between Pages ........................................................................................... 63
Store Setup Data ....................................................................................................... 63
Cancel the Installation Setup ..................................................................................... 63
Device Info ........................................................................................................................ 63
General Configuration ....................................................................................................... 64
Audio Warnings ................................................................................................................. 65
Dimming Input ................................................................................................................... 65
Brightness ......................................................................................................................... 66
Illumination Curve ............................................................................................................. 66
Load Default ...................................................................................................................... 67
GPS Source Selection ...................................................................................................... 68
External GPS Receiver Configuration ............................................................................... 68
Target Status Protocol ...................................................................................................... 68
ARINC 429 ........................................................................................................................ 69
GPO_0 .............................................................................................................................. 69
GPI_0 ................................................................................................................................ 69
Control Head Interface ...................................................................................................... 70
Second Control Interface .................................................................................................. 70
2.8 Post Installation Check ................................................................................................................ 71
Mechanical Installation and Wiring Check ........................................................................ 71
Power Supply .................................................................................................................... 71
Activated Subsystems ....................................................................................................... 71
Receiver Operation ........................................................................................................... 71
Antenna Check .................................................................................................................. 71
Interference Check ............................................................................................................ 71
Flight Test Check .............................................................................................................. 72
2.9 Troubleshooting ........................................................................................................................... 72
2.10 Targets Status Protocol - IF3 Interface ....................................................................................... 73
2.1 Packaging, Transport, Storage
Visually inspect the package contents for signs of transport damage.
The packaging material is inflammable by burning, toxic fumes may develop.
Keep the packaging material and use it in the case of a return shipment. Improper or faulty packaging
may lead to transport damages.
Make sure to transport the device always in a safe manner and with the aid of suitable lifting
equipment if necessary. Do never use the electric connections for lifting. Before the transport, a clean,
level surface should be prepared to put the device on. The electric connections may not be damaged
when placing the device.
First Device Checkup
• Do a check for signs of damages.
• Please make sure that the indications on the type plate agree with your purchase order.
• Make sure that the equipment is complete ("Scope of Delivery", page 35).
Storage
If you do not install the device immediately, make sure to store it in a dry and clean environment.
Make sure that the device is not stored near strong heat sources and that no metal chippings can get
into the device.
Storage temperature see "Technical Data" page 23.
To Next Page
Loading...