Becker BD406 - Arinc 429; Gpo_0; Gpi_0

Becker Avionics
Installation and Operation
Installation Setup
DV16401.03 Issue 04 May 2021 BD406/PBD406 69
ARINC 429
Display Contents
Description
"ARINC BAUDRATE":
• Used for ARINC 429 baud rate selection.
• Select function(s) required for the installation.
ARINC BAUDRATE
100 kBits/s
12.5 kBits/s
• Use the rotary knob to select parameter.
• Push the "STO" key to confirm.
GPO_0
Display Contents
Description
"GPO_0 CONFIG":
• Select function(s) required for the installation.
GPO
_
0
CONFIG
NEW BEACON
NONE
• Use the rotary knob for selection.
• Push the "STO" key to confirm.
NONE:
• The output is disabled.
NEW BEACON:
• The output is active when a new (not registered in memory)
message is received.
GPI_0
Display Contents
Description
"GPI_0 CONFIG":
• Select function(s) required for the installation.
GPI_0 CONFIG
HOMING
NONE
• Use the rotary knob for selection.
• Push the "STO" key to confirm.
NONE:
• The input is disabled.
HOMING:
• Voice notification about homing (true bearing, distance) is audible
when rotary knob is pushed in mission mode.