Restriction for Use
22 BD406/PBD406 DV16401.03 Issue 04 May 2021
1.6 Cleaning and Disinfection of Devices
Cleaning:
Within the framework of officially prescribed or recommended protective measures during the corona
pandemic, it makes sense that devices and systems that are directly accessible to people, are
disinfected as required. This particularly applies to the controls on avionics devices.
Not all commercially available cleaning agents/disinfectants are suitable for use
on the surfaces of our devices. Many of the agents contain solvents or greasing
components that can cause undesired effects on the controls and the display.
Example:
• Do not use aggressive cleaning agents e.g. Acetone.
o These cleaning agents can cause damages.
Procedure:
• Do not clean/disinfect the device(s) during operation.
Device body and the controls:
• Clean the device body and the controls with a clean, soft, lint free cloth moistened with
clean water.
Disinfection:
To reduce the risk of infection:
• As a disinfectant, we recommend diluted monohydric alcohols such as Isopropanol or
Ethanol.
o Wear suitable protective gloves that are disinfected.
o Moisten a clean, soft, lint free cloth with the related liquid to clean all controls.
o Please obey the usual protective measures when using monohydric alcohols for
cleaning purposes.
• Do not use spray bottles or evaporators to apply disinfectants or cleaning liquids to the
Becker Avionics devices. Liquids could penetrate the devices and can result in damage.
LCD screen:
• Clean the LCD screen with a clean, soft, lint free cloth moistened with clean water and
take care not to scratch the surface.
• Cleaning agents suitable for cleaning TFT screens and LCD displays can also be used.
Obey the related instructions from manufacturer.
1.7 Restriction for Use
The product is to be used inside the declared limits.
To Next Page
Loading...