Becker BD406 - Page 93

Becker Avionics
DV16401.03 Issue 04 May 2021 BD406/PBD406 93
Term
Description
TAC
Type Approval Certificate Number. The TAC number is a unique
number assigned by the COSPAS/SARSAT Secretariat to each beacon
model which has been successfully tested in accordance with the
COSPAS/SARSAT Type Approval Standard (C/S T.007)
Target
NavPoint or Beacon, depending on what is visible on the device display.
Target Position
Beacon or NavPoint Position (latitude, longitude)
Targets Status
Information outgoing of the device (available on IF3 interface), contains
status of all detected Beacons and NavPoints.
TO/FROM
Direction indicator for CDI. Allowed values:
TO: shows that target is not passed (pictogram: )
FROM: shows that target is passed (pictogram: )
UNKNOWN: no pictogram assigned to this value.
True Bearing
Course (related to the true north) from device position to target position.
Range: [0…360] degrees.
UTC Offset
Enables the indication of time and date compliant with the current time
zone.
Valid
Means that data are reliable
Table 6: Mission Mode - Term and Definitions