How to Use this Manual
Manual Format
UniCel DxC Systems Instructions For Use A13914 General Information
October 2005 Page 1-3
1
How to Use this Manual
Manual Format
Information in this manual is presented in modular units. Each unit of information is
described by a brief title in the left margin.
Many units consist of a table which presents a procedure, process, or description.
Procedure Tables
Procedure tables are the most common type of table in this manual. They list each step
of a procedure by number with the corresponding action that is to be performed.
Occasionally, a decision must be made at a step within a procedure. A smaller
decision table is then presented which describes the variable conditions in the left
column and the appropriate action for each condition in the right column.
Example of Procedure Table
The following table is an example of a procedure table that contains a decision table.
Read the decision table as a complete sentence, using the first heading to introduce the
condition and the second heading to introduce the action. Step 2 of the table is read:
To enter individual Sample IDs, type the Sample IDs for rerun in the Sample IDs
field.
To enter a range of Sample IDs, type the Sample ID at the beginning of the range in the
Range field.
Step Action
1Select Rerun [F6].
2
To enter... type...
individual Sample IDs, the Sample IDs for rerun in the Sample
IDs field.
a range of Sample IDs, the Sample ID at the beginning of the
range in the Range field.
3 Select a button from the bottom of the dialog box.
To Next Page
Loading...
Need help?
General
