Beckman Coulter UniCel DxC Synchron 800 User Manual

Overview
Introduction
UniCel DxC Systems Instructions For Use A13914 User Defined Reagents
October 2005 Page 9-1
9
CHAPTER 9 User Defined Reagents
Overview
Introduction
The user may define up to 100 chemistries on the UniCel DxC 600/800 using an
endpoint or rate, and calibrated or non-calibrated methodology. A set of parameters
must be defined which fully characterizes an analyte. Once defined, the parameters
are stored in memory according to the test name designated in System Setup.
Chemistries can then be configured on the test selection menu for programming along
with the Beckman Coulter-defined chemistries. When configured, quality control,
reference ranges, and special calculations may be used with these configured
chemistries. Overrange Detection and Correction (ORDAC) is not available.

Beckman Coulter UniCel DxC Synchron 800 Specifications

General

Brand	Beckman Coulter
Model	UniCel DxC Synchron 800
Category	Laboratory Equipment
Language	English