Panels
Introduction
UniCel DxC Systems Instructions For Use A13914 System Setup Options
October 2005 Page 4-19
4
Panels
Introduction
The Panels option allows grouping of analyses commonly programmed and run
together.
Defining, Editing and Deleting Panels
The operator may define a maximum of 50 panels, and must assign a unique name to
each.
From the Setup screen, select <6> Panels to show the Panel Summary screen, then
select [F1] to define, edit or [F2] to delete panels.
Panel definitions may be viewed and modified at any time.
Selecting a Default Panel
The operator may select one of the defined panels as the Default Panel. The DxC
system selects the Default Panel as the test(s) to run when the sample ID has no
programming assigned, or after a Host Query time-out.
From the Setup screen, select <6> Panels. From the resulting Panel Summary screen,
select the panel that you want to serve as the default and press Default [F3]. The ">"
character shows to the left of the selected Default Panel.
To Next Page
Loading...
Need help?
General
