Printing Recalled Results
Introduction
Results Recall UniCel DxC Systems Instructions For Use A13914
Page 8-10 October 2005
Printing Recalled Results
Introduction
All recalled results may be printed.
Printing a Recalled Result
Follow the steps below to print a recalled result.
Note: Multipatient Sample reports print a maximum of 15 chemistry results and 5
special calculation results per page. Additional results print on subsequent pages.
Step Action
1 Select the Results icon from the menu bar.
2
To print using... Then...
Default report format. Go to Step 4.
Patient Multi-Sample report
format
Continue with Step 3.
3 If Patient Multi-Sample Report box is selected, input specific Patient ID.
Select Print [F10].
Select samples to be compiled into report.
All selected Patient Results will be compiled into a single report.
4 From the Recall Results By screen, select the results to be viewed, as
described previously in this chapter.
5Select Print [F10]. The selected results will be printed in the format
selected in System Setup.