Version Upgrade
Introduction
System Setup Options UniCel DxC Systems Instructions For Use A13914
Page 4-42 October 2005
Version Upgrade
Introduction
The Version Upgrade option allows the operator to load a new version of operating
software onto the system.
Setup
From the Setup screen, scroll down and select <25> Version Upgrade to load an
upgrade to operating software.
The system must be in Standby or Stopped state to load new software. Never turn off
power to the system or console while loading software.
Please refer to the UniCel DxC Software Installation Procedure shipped with the
CD-ROM.
To Next Page
Loading...
Need help?
General
