Reagent Load
Sorting Reagent Status
UniCel DxC Systems Instructions For Use A13914 Reagent Load/Calibration
October 2005 Page 5-3
5
Sorting Reagent Status
The order in which CC reagents are shown on the Reagent Status/Calibration Status
screen can vary according to operator selection.
Load/Unload Reagent
MC Reagents Information
The DxC System loads and unloads Modular Chemistries (MC) using the bar code
system. The reagent bar code information includes:
• Serial Number
• Lot Number
• Expiration Date
• Reagent Name
Level Sense Error Level sense check failed to properly detect reagent in one
or more compartments.
n/a Reagent status is not applicable for a chemistry (e.g., an
electrolyte chemistry).
Table 5.1 Reagent Status Messages, continued
Message Explanation
(2 of 2)
Step Action
1 Select the Rgts/Cal icon from the menu bar.
2Select Sort [F9]. A dialog box appears.
3 Select the sorting option in which the CC Chems should be shown.
• Position (on reagent carousel).
• Chemistry (Lists CC Chems alphabetically. The oldest cartridge is listed
on top, for multiple carts of the same Chem.)
• Days Left (onboard stability or expiration date, whichever comes first).
• Tests Left (number of tests left in cartridge).
• Cal Time Left (oldest Cal date listed first).
Note: The option selected will be shown in ascending order or alphabetical
order. Once the sorting option is selected, the sorting order will be retained
until the operation changes it.
To Next Page
Loading...
Need help?
General
