Prior to Programming
Verifying Sample Carousel Status: Main Operator Screen
UniCel DxC Systems Instructions For Use A13914 Sample Programming
October 2005 Page 7-3
7
Verifying Sample Carousel Status: Main Operator Screen
The status of racks currently loaded on the sample carousel can be viewed on the Main
Screen. The status of each sample is designated by an icon, described by the legend at
the top of the screen.
Refer to CHAPTER 2, System Description, "Main Operator Screen" for additional
information on Sample Carousel status.
Table 7.1 Sample Status Designations
Sample Status Meaning
In Progress Sample has been identified and is currently being
sampled for programmed tests.
Incomplete Sample has completed all tests possible and has
some tests which are still pending.
Complete All tests have been completed.
Reserved for Cal Rack/Position assigned to a calibrator.
Sample Required Sample is programmed but not yet run by the
system.
Rerun Sample has been requested for rerunning.
Removed Sample has been unloaded but some tests are still
being processed.
Manual Assign Sample ID has been manually assigned to a Rack/
Position.
To Next Page
Loading...
Need help?
General
