Overview
Common Abbreviations
Maintenance UniCel DxC Systems Instructions For Use A13914
Page 10-2 October 2005
Common Abbreviations
CC – Cartridge Chemistry side of the system
MC – Modular Chemistry side of the system
ISE – Ion Selective Electrode (Flow Cell Module)
EIC – Electrolyte Injection Cup
CCWA – Cartridge Chemistry Wash Solution
CTS – Closed Tube Sampling
Maintenance Schedule
The UniCel DxC System requires maintenance to operate correctly. Maintenance is
scheduled at the following intervals:
• Weekly
• Monthly
• Two-Month
• Three-Month
• Four-Month
• Six-Month
This maintenance schedule is developed for all systems. Following specific
maintenance procedures, running calibration and controls may be required.
Weekly Maintenance
• Check Reagent Levels
• Replace Cuvette Wiper
• Clean Total Protein and Albumin Cups (DxC 800 only)
• Clean Probes (Exterior)
• Clean Flow Cell and Cups
• CC Probe Cleaning
• Check Chloride Calibration Span
Monthly Maintenance
• Replace Alkaline Buffer
• Clean All Cup Modules
• Clean Mixers
• Calibrate Lamps and Sensor
• Replace CTS Blade (Sarstedt S-Monovette Type CTS Option only)
To Next Page
Loading...
Need help?
General
