MC Calibration
Calibration Reports
UniCel DxC Systems Instructions For Use A13914 Troubleshooting Calibration and Result Errors
October 2005 Page 13-7
13
Failed Calibration Log
(ERR)
The fields listed below categorize information about a
failed calibration. Multiple errors are shown here for any
chemistry failure. The errors should correlate with any of
the asterisked (*) fields listed within the calibration report.
This section of the report appears only when a calibration
fails.
• Reagent – Identifies the failed chemistry.
• Level – Identifies the calibrator level which failed.
• Condition – In the event that an error occurs, an asterisk
(*) appears next to the value which is out of
specification. The corresponding error flag will print in
this field. Only those errors that FAIL the calibration
will print.
Table 13.5 Cup Module Calibration Report Field Definitions, continued
Field Description
To Next Page
Loading...
Need help?
General
