AeroNav 900/880 Series Pilot’s Guide
89000039-010
3-14 FMS Subsystem Rev 1 May 2019
To insert an airway into the flight plan, move the cursor to a
position after the leg where the airway will be joined. It will be an
insert cursor. Press the right knob button to bring up the
dropdown menu containing the options available after that leg.
Scroll the cursor down through the list until the desired airway
name is selected. Note that airways are always at the bottom of
the list.
Once the desired airway is selected, press the right knob button
or touch the selected airway and a list of exit points will appear in
a secondary dropdown. The list of exit points is presented in the
order along the airway, not in alphabetical order. Select the
desired exit point to insert the airway into the flight plan.
Airway Dropdown
To Next Page
Loading...
