EasyManua.ls Logo

BENDIXKing AeroNav 910 - Navigation Mode;CDI Scale Changing

BENDIXKing AeroNav 910
426 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
AeroNav 900/880 Series Pilot’s Guide
89000039-010
6-22 Navigation Rev 1 May 2019
NAVIGATION MODE/CDI SCALE CHANGING
Each navigation mode has an associated CDI scaling associated
with it per the table below:
Navigation Mode
CDI Full Scale Value
Enroute
2.0 NM (5.0 NM for non-
WAAS)
Terminal
1.0 NM
Approach
0.3 NM or 2°, whichever is less
at the FAF
In order to prevent abrupt changes to CDI deflection (especially
important during autopilot-coupled operation), the mode changes
and CDI full scale deflection changes are gradual.
Automatic transitioning between the navigation modes occurs in
accordance with the following diagram:

Table of Contents

Related product manuals