AeroNav 900/880 Series Pilot’s Guide
89000039-010
Rev 1 May 2019 Map Subsystem 4-63
CHART VIEWS
If the currently displayed chart is not the desired one, use the “Select
Chart” LSK to jump back to the Directory List where the desired
airport/chart can be selected.
Once a chart is displayed, the left-hand LSKs provide means to alter
the view or presentation of the chart. A “Chart” LSK is provided to
select Airport or Procedure type charts. The “View” LSK provides a
set of views to choose from based on which option was selected in
the “Chart” LSK. For example, if Procedure was picked, then one of
five chart views can be selected (Plan, Header, Profile, Minimums,
All). If Airport was picked, then a slightly different set of chart views
could be selected (Plan, Header, Runways, Departure, All) The chart
can be zoomed in/out as desired by using the right-hand knob on the
AeroNav or via a pinch-zoom touch method.
TAXI CHARTS/AIRPORT DIAGRAMS
If a published procedure was used via the Charts tab for the landing
airport, the display chart will automatically switch over to the airfield
diagram during post-landing roll out. Your ownship position on the
To Next Page
Loading...
