EasyManua.ls Logo

BENDIXKing AeroNav 910 - Course Changes and Holds

BENDIXKing AeroNav 910
426 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
AeroNav 900/880 Series Pilot’s Guide
89000039-010
6-18 Navigation Rev 1 May 2019
COURSE CHANGES AND HOLDS
If the course change at a waypoint is more than 120°, the
AeroNav will issue an alert approximately 30 seconds prior to the
turn. For course changes less than 120°, the alert will be issued
approximately 10 seconds prior to the turn.
For normal leg transitions, the alert text will be “Next Leg xxx° in x
seconds” where xxx is the course and x is the number of seconds
left until the turn. When the next leg is a hold, however, the alert
text shows the entry type. It will be “Teardrop Entry”, or “Parallel
Entry” or “Hold Course xxx°” where xxx is the inbound course of
the hold, representing a direct entry.
If the course change at a waypoint is greater than 135°, then the
FMS will treat the waypoint as a “fly-over” waypoint. If the course
change at a waypoint is less than or equal to 135°, then the FMS
will treat the waypoint as a “fly-by” waypoint meaning lead turns
beginning up to a maximum of 2.5nm can be expected.

Table of Contents

Related product manuals