AeroNav 900/880 Series Pilot’s Guide
89000039-010
Rev 1 May 2019 General 7-63
SOFTWARE UPDATES
With very few exceptions, all software inside the AeroNavs is
capable of being updated via the USB connections as well. This
means the AeroNav does not need to be returned to the factory
for any future software updates. The BendixKing position is that
any shop that holds a repair station certificate, an A&P, or an
Experimental Aircraft owner with log book signoff authority can
perform the update. The person performing the update must
follow the provided Service Bulletin explicitly and mail/fax/email
back in the completed update sheet that is part of the Service
Bulletin but BendixKing does not restrict this to just BendixKing
Service Centers.
To Next Page
Loading...
