BENDIXKing AeroNav 910 - Page 269

AeroNav 900/880 Series Pilot’s Guide
89000039-010
Rev 1 May 2019 Aux Subsystem 5-45
User Option Item Title
Description
Aircraft Flight ID
Provides a means to enter in
the optional aircraft flight ID for
Mode S transponder operations.
Push the bottom right AeroNav
knob to put the field into edit
mode and twist the inner ring to
change the value and twist the
outer ring to move to the next
digit. Put the cursor on any
value (e.g. trailing zeros) you
wish to delete and press the
bezel CLR button. Push the
bottom right knob again to exit
edit mode.
Note: This selection is only
available if the system is
configured to communicate with
a remote mount Mode S
transponder.
Transponder Default Code
Provides a means to enter in a
regional default “VFR”
transponder code.
Push the bottom right AeroNav
knob to put the field into edit
mode and twist the inner ring to
change the value and twist the
outer ring to move to the next
digit. Push the bottom right
knob again to exit edit mode.
Note: This selection is only
available if the system is
configured to communicate with
a remote mount Mode S
transponder.