BENDIXKing AeroNav 910 - Page 295

AeroNav 900/880 Series Pilot’s Guide
89000039-010
Rev 1 May 2019 Navigation 6-3
Integration
Category
Description
AeroNav
Functionality
Basic electro-
mechanical
nav indicator
There is at least one
external CDI or HSI in
the airplane and the
AeroNav has access
to the course data
from it.
Set the course on
the external unit
and the AeroNav
will display that
value.
No auto-slew
capability of the
course on the
AeroNav.
The nav source
knob/button is
used only to toggle
between the
available states.
Nav source modes
available:
GPS
VLOC †
GPS  VLOC †
OBS
OBS  VLOC †
“Non-
cooperative”
electronics
For Example
G500/600
Aspen EFD1000
BendixKing
EXP5000
Dynon Skyview
EFIS 40/50
The AeroNav can
receive course input
from this external
device(s).
The AeroNav can
send commands to set
course (e.g. “auto-
slew”) on those
external device(s).
The nav source
knob/button is
used only to toggle
between the
available states.
Nav source modes
available:
GPS
VLOC †
GPS  VLOC †
OBS
OBS  VLOC †