AeroNav 900/880 Series Pilot’s Guide
89000039-010
6-8 Navigation Rev 1 May 2019
NOTE
Aircraft Integration
The Nav Source modes available in your airplane
will be dependent on the level of integration with
other on-board systems. BendixKing strongly
recommends practice operations in VMC conditions
before any use in IMC, to understand the level of
integration between the AeroNav and the other on-
board systems and, therefore, the Nav Source
modes available.
The nav source knob is labeled “CDI” above the knob and is
designed to allow you to toggle the CDI and system nav source
between the active and armed states defined above.
To Next Page
Loading...
