AeroNav 900/880 Series Pilot’s Guide
89000039-010
6-34 Navigation Rev 1 May 2019
Enabled Missed Approach on Map
Prior to executing the missed approach, apply go-around power,
ensure the aircraft is trimmed for the power setting, establish a
climb attitude and consider using the autopilot to smoothly
execute the assigned climb-out or published missed approach
procedures.
The Nav Source will automatically toggle back to “GPS” shortly
after crossing the MAP, if it weren’t already set to “GPS” unless
you had manually switched the Nav Source to “VLOC” prior to
being established on final with the localizer tuned and identified –
in that case, it will stay in “VLOC” until you manually change it.†
To Next Page
Loading...
