BENDIXKing AeroNav 910 - Page 53

AeroNav 900/880 Series Pilot’s Guide
89000039-010
Rev 1 May 2019 System Overview 1-43
Bezel-only Control Input
Functions
Touch screen-only Control
Input Functions
Selecting page function keys
(e.g. changing the “major”
pages of FMS, MAP, AUX)
Map panning
Power on/off
Graphical Flight Planning
(“Rubber banding”)
Changing the Primary Nav
Source
Calling up a map page info
box
Starting the Frequency List
Selecting a #2 or #3 standby
frequency for swapping into
the active frequency slot
Frequency Swap
Changing remote transponder
mode
When editing data (e.g. FMS waypoint data, chart identifiers)
using touch, virtual keyboards are displayed on the AeroNav.
There are two formats – a numeric keyboard and an alpha
keyboard with a means to switch back and forth between formats.