7 Installation, initial startup and function test
7.1 Safety instructions for installation and initial startup
During installation and initial startup of the machine, comply with the
requirements of the accident prevention regulations, environmental protec‐
tion and any safety regulations of the country in question.
In addition to the regulations listed here, the general safety regulations
(→ 3) must be complied with in full.
Transport of the subassemblies (→ 6.5).
Only take the machine into operation if it is in perfect technical condition and
is safe. First, check whether all protection and safety devices are func‐
tioning and that none are missing.
50-020-1011-900_EN
1.0 - © 2/15/2017
151
7 Installation, initial startup and function test
7.1 Safety instructions for installation and initial startup
To Next Page
Loading...
