bergmann 4010 - Assembly; Initial Startup and Function Test of the Machine; Preparatory Activities

7.2 Assembly
The machine is supplied fully assembled. No assembly is required.
7.3 Initial startup and function test of the machine
7.3.1 Preparatory activities
Do not work in any way that impairs safety. Take the machine into operation
in accordance with its intended use, taking account of safety aspects and
potential dangers, and as described in the documentation. When doing so, it
is essential to comply with the regulations on accident prevention and envi‐
ronmental protection.
►
Obtain information about first aid and rescue possibilities (emergency
doctor, fire department, etc.).
►
Familiarize yourself with the working environment, including all obstacles
in the working area, for example.
►
Check that all operating signs are present.
►
Check the hydraulic fluid level (→ 9.3.3).
►
Check the engine oil level (→ 9.3.3).
►
Check the fuel level (→ 9.3.3).
►
Check the track tension .
50-020-1011-900_EN
1.0 - © 2/15/2017
153
7 Installation, initial startup and function test
7.2 Assembly