►
Check the electrical system.
DANGER! Risk due to catching or entanglement!
When the maintenance cover is open, there is a risk of getting
entangled or caught by the moving parts on the running drive motor!
n Do not open the maintenance cover when the drive motor is run‐
ning.
►
Check the coolant (→ 9.3.3).
►
Check the windscreen washer system (→ 9.3.3).
►
Check the joystick moves easily.
►
Check the machine for external signs of damage.
If you notice any missing or loose bolts, missing covers, oil leaks, defec‐
tive, cracked or kinked lines, do not continue with startup until the
defects have been rectified.
►
For information about preparing the optional accessory and equipment
for initial startup according to the information of the relevant manufac‐
turer, see the respective third-party documentation (→ part 3 of the docu‐
mentation).
50-020-1011-900_EN
1.0 - © 2/15/2017
154
7 Installation, initial startup and function test
7.3 Initial startup and function test of the machine