The danger area crane (2) is between the platform (3) and basic vehicle (5)
and defines the area in which there is an increased risk of crushing/impact
due to the crane movements.
The danger areas defined here depend on each particular crane and the
installation location. Alternatively, the crane can be attached on the front of
the machine on the mounting frame. For further information about the
danger areas, see third-party documentation (→ part 3 of the documenta‐
tion) of the particular crane manufacturer.
The platform itself poses no risk during proper operation.
3.20 EMERGENCY STOP devices
The machine is equipped with an
EMERGENCY STOP
switch in the opera‐
tor's cab.
Pressing the
EMERGENCY STOP
switch immediately stops the movement
of the machine. The drive motor and the hydraulic functions of the bodies
remain in operation. All
EMERGENCY STOP
switches must be unlatched
so the machine can be taken back into operation.
50-020-1011-900_EN
1.0 - © 2/15/2017
83
3 Safety
3.20 EMERGENCY STOP devices
To Next Page
Loading...
