7.3.2 Carrying out the function test/initial startup
During the function test, pay attention to unusual noises and increased sur‐
face temperatures which might indicate a defect.
If there are malfunctions during the function test, immediately stop the
machine, secure it and rectify malfunctions.
Comply with monitoring and warning displays in accordance with the docu‐
mentation.
Operate the machine in accordance with the documentation.
During operation of the machine, no people are allowed to remain on the
machine with the exception of the operator and people who are required for
the technical working sequence.
►
Carrying out preparatory activities (→ 7.3.1).
►
Switch on the machine (→ 8.4).
►
Check monitoring and warning lights for correct function.
►
Check signal and lighting devices for correct function.
50-020-1011-900_EN
1.0 - © 2/15/2017
155
7 Installation, initial startup and function test
7.3 Initial startup and function test of the machine
To Next Page
Loading...
