2.10 Regional regulations
The machine has been built in accordance with the state of the art, and was
developed and tested according to European standards.
The owner/user must notify Bergmann Maschinenbau GmbH & Co. KG
about any regional or mining regulations to be complied with during the
project planning phase. Compliance with regional regulations or codes of
practice is the responsibility of the owner/user.
Research into standards applicable in target markets is not the responsi‐
bility of the machine manufacturer.
50-020-1011-900_EN
1.0 - © 2/15/2017
33
2 General
2.10 Regional regulations
To Next Page
Loading...
