3.3 Designated use
The machine is used for transporting on consolidated roads and unconsoli‐
dated tracks. Closed construction sites or works premises are intended as
the movement areas. The machine consists of a basic machine which is
equipped with different bodies, depending on the application.
Basic machine
The basic machine is used as a carrier vehicle designed for using the var‐
ious bodies in accordance with the application. The machine is designed for
the "manual operation" operating mode and is planned in for use in the
industrial and commercial sectors.
The machine is operated by instructed personnel (only with the suitable
anthropometric measurements
1)2)
) by actuating the controls from the opera‐
tor's seat. The operator is responsible for making sure that other persons
who are in the vehicle's action area do not get injured.
1)
DIN EN ISO 7250-1:2010-06 | Basic human body measurements for technological design -
Part 1: Body measurement definitions and landmarks
2)
DIN CEN ISO/TR 7250-2:2013-08 (DIN SPEC 91279:2013-08) | Basic human body meas‐
urements for technological design - Part 2: Statistical summaries of body measurements from
national populations
50-020-1011-900_EN
1.0 - © 2/15/2017
37
3 Safety
3.3 Designated use
To Next Page
Loading...
