The maximum permissible uphill gradient, downhill gradient and cross slope
as set out in the technical data must not be exceeded in order to safeguard
stability. The machine may only be operated using bodies/components
approved by Bergmann Maschinenbau GmbH & Co. KG. The approved
bodies/components are defined in the documentation. Approved bodies are:
n Rear tipping trough
n Round tipping trough
n Platform (crane optional)
Any other use or application in addition to this is deemed as contrary to the
designated use. The manufacturer accepts no liability within the framework
of their warranty for any damages resulting from such use.
When the machine is used as designated, the design of it ensures that the
set-up, operation and maintenance of it poses no risk to personnel. Set-up,
cleaning, maintenance and repair work may only be carried out when the
machine is shut down.
Designated use also entails observing the entire documentation and
adhering to the conditions for inspection and maintenance.
50-020-1011-900_EN
1.0 - © 2/15/2017
38
3 Safety
3.3 Designated use
To Next Page
Loading...
