Rear tipping trough
The rear tipping trough is used for holding, transporting and tipping loose
bulk materials up to a max. 100 mm grit size. The loose bulk materials may
only be dumped using the hydraulically operated dumping device.
Any other use or application in addition to this is deemed as contrary to the
designated use. The manufacturer accepts no liability within the framework
of their warranty for any damages resulting from such use.
Designated use also entails observing the entire documentation and
adhering to the conditions for inspection and maintenance.
Round tipping trough
The round tipping trough is used for holding, transporting and tipping loose
bulk materials up to a max. 100 mm grit size. The loose bulk materials may
only be dumped using the hydraulically operated dumping device.
Any other use or application in addition to this is deemed as contrary to the
designated use. The manufacturer accepts no liability within the framework
of their warranty for any damages resulting from such use.
Designated use also entails observing the entire documentation and
adhering to the conditions for inspection and maintenance.
50-020-1011-900_EN
1.0 - © 2/15/2017
39
3 Safety
3.3 Designated use
To Next Page
Loading...
