►
Check the coolant level (→ 9.3.3).
►
Check the hydraulic fluid level (→ 9.3.3).
ATTENTION! Warning of machine damage!
A risk is posed of the machine being damaged due to air in the fuel
system if the fuel tank is run completely empty.
n Never run the fuel tank completely empty.
n Check the fuel fill level and fill up if necessary.
►
Check the fuel level (→ 8.2.5.2).
►
Check the tensioning in the caterpillar tracks.
►
Check the electrical system is functioning.
►
Check all
EMERGENCY STOP
switches for correct function.
8.4 Switching on the machine
Preconditions for switching on the machine:
n Checks carried out before work starts (→ 8.3).
n All controls are in the neutral position.
n Parking brake is activated(→ 8.2.6.7).
n The direction of travel switch is located in the center position (→ 8.2.6.7).
50-020-1011-900_EN
1.0 - © 2/15/2017
209
8 Operation
8.4 Switching on the machine
To Next Page
Loading...
