The optional swiveling operator stand can be turned by actuating lever (1)
by 180°.
►
Bring the machine to a stop.
►
Activate lever and turn operator stand 180°.
►
Ensure that the lever is properly engaged again and the operator stand
cannot turn inadvertently.
8.2.8.2 Rotating beacon
The optional rotating beacon is controlled with the
Rotating beacon
switch.
Position 1 - Rotating beacon off
Position 2 - Rotating beacon on
The
rotating beacon
switch is located on the front control station.
Fig. 8.35
50-020-1011-900_EN
1.0 - © 2/15/2017
206
8 Operation
8.2 Operation of the machine
To Next Page
Loading...
