Pos. Maintenance point Interval Lubricant speci‐
fication
Lubricant quan‐
tity
Remark
1 Maintenance cover gas
pressure springs joints
weekly Spray-on grease as needed 4 joints
2 Drive unit maintenance
cover hinges
weekly KP2K-30
DIN 51825
until grease
emerges
3 lubrication nip‐
ples
3 Toolbox door hinge weekly Spray-on grease as needed 2 hinges
4 Locking device for tool box
maintenance door
weekly Spray-on grease as needed Lubricate the
locking device
5 Hinges; maintenance flap
for batteries
weekly Spray-on grease as needed 2 hinges
6 Batteries for maintenance
flap lock
weekly Spray-on grease as needed Lubricate the
locking device
7 Door hinges on cab door weekly Spray-on grease as needed 2 hinges
8 Cab door pressure spring
joints
weekly Spray-on grease as needed 2 joints
50-020-1011-900_EN
1.0 - © 2/15/2017
238
9 Daily maintenance work
9.3 Maintenance work to be carried out
To Next Page
Loading...
